Features:
The PVLAM 1.0 series of solar panel vacuum laminators are designed for a high production factory throughput, low maintenance and minimal operator training. A single button activates the rapid laminate/cure process cycle.
The top vacuum chamber is evacuated through ports from the top platen, which are merged together at a manifold with a connection of a one-inch pipe to the top vacuum pump system.
The bottom chamber is evacuated through ports on the sides, mounted on the spacer, which also terminate on a manifold with a one-inch pipe to the bottom chamber vacuum pump system.
Vacuum gauges are connected to both the top and bottom chambers.
Electrical 3-phase mains rated at a max. 32A per phase, 220-240V, 50/60- Hz. Process controls temperature levels and timings, cooling and vacuum automatically controlled. A max of 10 cycles.
System Specification:
Temperature: Max. 200 deg.C, constant plate temperature lamination
- Vacuum: Absolute 2mmbar in 0 seconds
- Programs: Up to 10 different program settings
- Laminate Size: Maximum size of 1380mm x 730mm
- Laminate Thickness: Maximum thickness of 12mm
- Temperature Uniformity: -<+5C
Note - EETS reserves the right to change specification without notice