PV Reference Cell - RC01

Specifications:

Connection:  5 metre 4 core shielded cable provided.
Mounting:  Framed in an aluminum extrusion section in which holes can be drilled for mounting with a nut & bolt.
Dimensions: 165mm x 165mm

Product Overview:

Calibration is carried out by comparison with a reference cell calibrated by TUV Rheinland Group.
The PV cell is cut into two halves. A high precision silicone coated wireround resistor is connected across one half to give an irradiance / Isc proportional mVolt signal in the region of 50mV. The other half remains at open circuit voltage for temperature compensation.
 
The PV Reference cell can be ordered at a cost of £300.00 inclusive of delivery worldwide. 

Note: EETS reserves the right to change specification without prior notice