Product Summary:
• Self powered (standalone renewable)
• No cable trenching
• No power bills
• Reduced pollution
• Reduced CO2 emission
• Optional Single PLT Lamp
• Wind turbine (VAWT or HAWT to location)
• 4 x Solar PV panels
• Sealed deep cycle battery
• Low maintenance
• Timer control
• Vandal resistant
• Column height 8m
• Galvanised finish
Technical Specification:
• 6 or 8m CU Phosco galvanised steel column
• 4 x solar PV panels on moveable mounting to allow optimum orientation.
• 1 x VAWT/HAWT wind turbine.
• Battery compartment below ground or in base.
• Turbine and panels mounted at height out of reach of vandals.
• Column has galvanised steel finish and can be painted.
• System has EETS fully automatic controls.
Where to site the Hybrolight:
We recommend siting where the following conditions apply:
• Grid-connection is not available.
• Cable trenching would be prohibitively expensive.
• Ground conditions are suitable for column ‘rooting’ or foundation and battery compartment.
• There is little or no shading (buildings, trees, etc) south of the intended column position.
Maintenance:
• The PV panels should not require cleaning during lifespan of product.
• The PV panels typically have a manufacturers guarantee of 25 years.
• The batteries typically have a manufacturers guarantee of 4 years.
• The wind turbine typically has a manufacturers guarantee of 3 years.
• The battery and electronics should be checked every 3 years by a qualified electrician.
CO2 Saving During Operation:
Assuming optimum siting conditions the predicted annual CO2 savings (relative to equivalent UK grid delivered electricity) are as follows:
Estimated annual CO2 saving for 1 Hybrolight unit = 176 kg CO2 / year
All components are recyclable.
Note: EETS reserve the right to change specification without notice